concrete mixer truck rules for using a backing spotter Related Information

Concrete Mixer Truck Rules for Using a Backing Spotter

Jan 23, 2015 · Mixer drivers learn seven steps to use when working with a spotter, including proper hand and arms signals as well as blind spot awareness tips. Appropriate

GUIDELINE FOR DELIVERING TO CONCRETE PUMPS

mixer trucks or between the mixer truck and the concrete pump before you begin backing towards the pump. 3.2 Crushing hazard. Do not get closer than 3 m (10 feet) to the pump unless you have a clear view of the spotter, stop immediately. Do not continue to back up until line-of-sight has been reestablished. 3.3 Crushing hazard. When the spotter

What is the check list of using concrete mixer truck? - Quora

Answer: There are grossly three ways to mix, stationary, ready-mixed concrete and mobile batching mixed concrete. Stationary is where the mixer is built at the construction site. While they are very large and can get a lot of concrete mixed at a time, they are immobile and have to be dismantled a

Vehicle Backing Safety Fact Sheet - Texas Department of

provide extra safety when backing large vehicles and vehicles with trailers. • Use the steering wheel as a visual reminder. Backing up a trailer can be counter-intuitive because the trailer moves in the opposite direction of the vehicle. When backing a trailer, it can jut out at a 90-degree angle from the vehicle. At its worst, the trailer can

Concrete Truck Safety: Risk Insights | The Safegard Group

Feb 19, 2019 · Do not use additional chutes beyond those supplied on the truck. Use a spotter when moving the truck with an extended chute. Make sure the chutes are locked in place before moving. Only employees are allowed on or in the vehicle. Concrete Pump Use. When operating a vehicle with a concrete pump, review the following before any work is started

CITY OF EMERYVILLE

The reason for the request to allow concrete pours on Saturdays is to reduce congestion on Hollis Street during a work day. Concrete pours require to be done without interruption and typically take12-14 hours. Approximately 18 trucks per hour are expected to arrive to the site and in order to cycle concrete mixer trucks every 5 minutes

OSHA Construction Safety for Vehicles, Mobile Equipment

Jan 14, 2015 · 34. THE DANGER OF BEING STRUCK-BY Hazard of a water cooler mounted on machine or a piece of equipment. Storing crew lunch boxes on equipment. Hand tools placed or stored on mobile equipment platforms or decks. Design of machine or external use of devices – inability to hear inside/outside of the cab. 35.

Item Detail - NRMCA

Concrete Mixer Truck Rules For Using A Backing Spotter Mixer drivers learn seven steps to use when working with a spotter, including proper hand and arms signals as well as blind spot awareness tips. Appropriate for front and rear discharge mixers.

Vehicle Backing Safety Fact Sheet - Texas Department of

provide extra safety when backing large vehicles and vehicles with trailers. • Use the steering wheel as a visual reminder. Backing up a trailer can be counter-intuitive because the trailer moves in the opposite direction of the vehicle. When backing a trailer, it can jut out at a 90-degree angle from the vehicle. At its worst, the trailer can

New Online Mixer Truck Inspection Lessons Expand NRMCA's

Aug 10, 2015 · Concrete Mixer Truck Backing Accident Prevention Program Concrete Mixer Truck Rules for Using a Backing Spotter Lockout/Tagout/Tryout in the RMC Industry, Part 1

Key Issues and Considerations when for Working around

ready-mix trucks, or volumetric concrete trucks. This information is intended to apply to and rules regarding the delivery of concrete to a concrete pump, concrete pump truck or crane 2.5 Make sure all mirrors are clean and properly adjusted before backing up to pump. 2.6 Always use a spotter when approaching the pump or crane.

NRMCA Monthly Safety Initiative

be focused on recognizing opportunities to reduce backing, planning ahead, spotting hazards, walking the construction site, checking mirrors, awareness of people at a construction site and around mixer trucks, knowing when to stop, and rules of using a spotter. Particular training should be provided for any and all potential spotters to prevent

Spotters: A Critical Element of Site Safety - Safety

A spotter serves as an extra set of eyes for drivers, equipment operators and individual workers on the site. Besides making sure that a truck that's backing up doesn't run into anything or anyone, spotters pay attention to cranes and other equipment operating under or near overhead power lines.

Job Description Hazard Identification Hazard Controls

2. Placing concrete as it comes from the hose 2. Air in line causing high-speed burst of concrete b. Concrete pumpers and redi-mix trucks will always have spotters while backing up. c. Equipment idling longer than 3 minutes shall be turned off. d. Only trained workers will handle the whip-hose. e. Whip-hose operator and others will

To unsubscribe from future mailings please click here

May 07, 2020 · Lessons include: Concrete Mixer Truck Rules for Using a Backing Spotter; Backing Accident Prevention Program ; Lo ckout/Tryout/Tagout: Parts 1 & 2; Working Safely On and Around Mixer Trucks; Pre-trip Inspection for the Front/Rear Discharge Mixer Trucks; and Working Safely Around Concrete Pumps.

Essential Steps for Safe and Efficient Truck Spotting

May 09, 2016 · Limiting the backing up of vehicles when personnel and other vehicles are present is an example of mitigating the risk of backovers. Adding spotters who have been trained in spotting and trained with the drivers of large cargo tanker trucks in the use of spotting techniques is an example of modifying the behavior of the triggering event. Both can help mitigate the risk of worker injury.

To unsubscribe from future mailings please click here

May 07, 2020 · Lessons include: Concrete Mixer Truck Rules for Using a Backing Spotter; Backing Accident Prevention Program ; Lo ckout/Tryout/Tagout: Parts 1 & 2; Working Safely On and Around Mixer Trucks; Pre-trip Inspection for the Front/Rear Discharge Mixer Trucks; and Working Safely Around Concrete Pumps.

TBT - Spotter Safety

batch truck backing up to a paver, a mixer truck backing into a hopper or hoist bucket, or a materials truck making a delivery. In order to make backing a totally safe operation, we must also address the duties and responsibilities of the spotter. Being a spotter may appear to be an easy job to perform, with not a lot of thought required.

BEST PRACTICES FOR DELIVERING CONCRETE DURING …

Mar 30, 2020 · • Ready Mix drivers will remain in their truck until they are required to discharge the concrete. • While discharging the concrete, other workers are to remain a safe physical distance from drivers. • The only person to touch the controls, chutes or use of water system for truck is the driver.

VERSION 1.0 - American Concrete Pumping Association

Safety Rules for Ready Mixed Concrete Truck Drivers Delivering to Pumps 3.3 WARNING! Crushing hazard. W hen backing towards the pump hopper, the spotter must use clear and concise hand signals. If you do not understand the hand signals, STOP IMMEDIATELY. 3.4 WARNING! Crushing hazard. If you find yourself acting as the spotter for another mixer truck,